The Pi 3 is something many can do for a cheap Kodi setup. If you have setup a Pi 2 with Kodi the installation is the same.
The Raspberry Pi 3 can freeze up at times while running Kodi but does work and is a fun project.
There are a few install packages to install Kodi to a RasPi 3.
Which one is used is a preference, OSMC has an installer that makes it easy.
Below are the steps to install Kodi to a Raspberry Pi 2 or 3 using OSMC.
- Raspberry Pi 3
- HDMI Cable
- Power Supply
- A controller such as a USB mouse or keyboard.
- Compatible Micro SD Card 8GB or Bigger. (32GB Max)
- SD-Card writer
If you already have all the extra components such as a HDMI cable, SD-Card, and power supply, only the RasPi 3 board will be needed.
If you don’t have all the extras a whole kit can be bought.
Example Raspberry Pi 3 Complete Kit on Amazon
CanaKit Raspberry Pi 3 Complete Starter Kit – 32 GB Edition
An SD-Card writer will also be needed to write the Kodi package to the SD-card.
If your computers are like mine and don’t have a Micro-SD Card Writer there are many cheap USB to Micro-SD card writers.
I bought this SD-Card Writer from Amazon which is very low-cost and works good.
IOGEAR SD/MicroSD/MMC Card Reader/Writer, GFR204SD
How To Install Kodi to a Raspberry Pi 3 Using OSMC
- Download the OSMC Installer program.
- Insert an SD-Card that Kodi will be written to in the SD-card Writer, and run the OSMC Installer
- Select the language to be used and Raspberry Pi 2/3 from the drop down boxes.
- Select the Build version. Choosing the newest Build is best.
- Select the media to write the package to. Here an SD-card is being used but a USB flash drive can also be used.
- There is an option to setup the wireless or use an Ethernet Connection.
- Check the drive the package will be written to is correct and click it.
- Accept the License Agreement
- It will download the package to install
- The OSMC Kodi package will be written to the SD-Card.
- When its done writing the package it will say Congratulations, and the SD-Card is ready to be installed into the Raspberry Pi.
- Insert the SD-Card into the Raspberry Pi
- Plug in the all the cables. The HDMI goes to a TV or Monitor. In this picture an Ethernet cable is plugged in from the router for internet, WiFi can also be used. A way to control it is needed such as an old USB keyboard and mouse.
- It will start the setup and finish the install
- It will ask some basic setup questions such as language and skin. The OSMC Skin can be used or the default Kodi Estuary Skin for a standard Kodi interface.
Using the Installer program is quick and easy, simply download the right installer for the operating system you are using.
For example, if your writing the files with a Windows PC download the Windows Installer.
Download the latest OSMC Raspberry Pi Installer and build here https://osmc.tv/download/
Kodi will now be installed to your Raspberry Pi, the next step is to setup add-ons which give it functionality.
The Raspberry Pi 3 works very well with Kodi. The built in WiFi while not the best works well enough and streamed movies fine.
The Pi 3 is a big improvement over the Pi 2. The Pi 2 also will run Kodi but does freeze at times.
To get the most out of Kodi a repository needs to be added which will contain all the popular add-ons.
The install for repository and add-ons will be the same across all hardware platforms including the Raspberry Pi 3.